16xx-Timers

161x-COI (Analog Line) Timers

1611-Incoming

1611-04: Maximum Double Ring Detection Off Timer

(Double Ring Max)

The system uses this option to detect valid double ring from the connected PBX. Valid double ring must be less than this interval.

Features

• None

IntraMail Features

• None

Options

•8-2040 mS

Default

•576 mS

1611-05: Ringing Signal End Detection Timer

(Ring Stop)

Use this option to set the Ringing Signal End Detection time. If the ringing signal on a line call is interrupted for longer than this interval, the system assumes ringing has stopped and terminates the call. Set this option for compatibility with the connected telco or PBX Centrex. If this interval is set to short, valid ringing will be inadvertently cut off. If too long, the system will leave the call set up even after ringing has stopped.

Features

• None

IntraMail Features

• None

Options

•64-16320 mS

Default

•6016 mS

1611-06: Caller ID Detection Timer

(CID Detect)

Use this option to set the Caller ID Detection Timer. With DSP-based Caller ID, the Caller ID Detection Timer is the amount of time between the first and second ring bursts that the system can detect Caller ID dig- its. If this timer is set too long, the outside caller will hear ringing followed by reorder tone. If set too short, all the Caller ID digits may not be detected. This timer is only used with DSP-based Caller ID. This option does not apply to COIU PCBs.

Features

•Caller ID (page 63)

IntraMail Features

•Caller ID and Voice Mail (page 456)

•Make Call (page 525)

Options

•64-16320 mS

Default

•2944 mS

684 ◆ System Options: 1001-1702

DSX Software Manual

Page 713 Page 715
Page 714
Image 714
NEC N 1093100, P Maximum Double Ring Detection Off Timer, Ringing Signal End Detection Timer, Caller ID Detection Timer
Page 713 Page 715

P, N 1093100 specifications

The NEC P,N 1093092,1093092 is a high-performance electronic component renowned for its versatility and advanced technology. As part of NEC's extensive portfolio, this component is designed to meet the demanding requirements of various industries, including telecommunications, automotive, and consumer electronics.

One of the main features of the NEC P,N 1093092,1093092 is its impressive operational efficiency. This component offers low power consumption without compromising performance, making it an ideal choice for battery-operated devices and energy-sensitive applications. Its ability to function effectively at low voltage levels further enhances its appeal, allowing manufacturers to design smaller, more efficient products.

Another key characteristic of the NEC P,N 1093092,1093092 is its robust reliability and durability. With a temperature range that can withstand extreme conditions, the component ensures consistent performance even in harsh environments. This reliability is critical for applications in sectors like automotive, where components are often subject to vibrations, temperature fluctuations, and other stress factors.

Moreover, the NEC P,N 1093092,1093092 integrates advanced semiconductor technology that enables high frequency and high-speed processing capabilities. This feature makes it suitable for applications requiring fast data transmission, such as in telecommunications infrastructure and data centre operations. As technology continues to evolve, the demand for components that can handle high data rates becomes increasingly important, and the NEC P,N 1093092,1093092 is well-equipped to meet these needs.

In terms of design, the component boasts a compact form factor, which facilitates integration into various hardware configurations. This flexibility allows engineers and designers to utilize the NEC P,N 1093092,1093092 in diverse applications while maintaining space efficiency in device design.

Finally, the NEC P,N 1093092,1093092 complies with international standards, ensuring that it meets the stringent quality requirements set forth for electronic components. This compliance not only enhances the component's reliability but also simplifies the certification process for manufacturers, making it a strategic choice for projects that require adherence to industry regulations.

In summary, the NEC P,N 1093092,1093092 stands out as a cutting-edge electronic component characterized by its operational efficiency, reliability, processing capabilities, compact design, and compliance with quality standards. Its advanced features make it an essential component for modern electronic applications across various industries.
Top Page Image Contents