NEC N 1093100, P 352x-1010-XXX /Local XXX Equal Access Dialing, 35xx-TollRestriction, Description

35xx-Toll Restriction

352x-1010-XXX / Local XXX (Equal Access Dialing)

3521-Table Options

3521x-Table1010-XXXOptions/ Local XXX (Equal Access Dialing)

Description

Use this program to set up the 1010 + XXX Equal Access Dialing Table. By default, this type of dialing is enabled because the 1010 + XXX Equal Access Dialing Table is a deny table with no entries (i.e., it denies nothing). A table entry is 3 digits long, using the digits 0-9. You can use the * character as a wild card, which can be entered in any position in the table. A wild card allows the table to accept any digit in that position. For example, the entry 2*0 represents 200 through 290. The Verified Account Code Table can hold up to 96 entries.

Options

3521-01: Initialize Table

(Initialize Table)

Use this option to initialize the 1010 + XXX Equal Access Dialing Table.

Features

•Toll Restriction (page 351)

IntraMail Features

• None

Options

•No (0) - Initialize the 1010 + XXX Equal Access Dialing Table.

•Yes (1) - Do not initialize the 1010 + XXX Equal Access Dialing Table.

Default

• N/A

3521-02: Table Type (Allow or Deny)

(Allow/Deny)

Use this option to designate the table as an allow or deny table. If set as an allow table, Toll Restriction will allow (permit) only those codes programed into the table.If set as a deny table, Toll Restriction will deny (block) only those codes listed in the table.

Features

•Toll Restriction (page 351)

IntraMail Features

• None

Options

•0 for deny

•1 for allow

Default

•0

844 ◆ Line Options: 3101-3714 DSX Software Manual