NEC P Tandem Calls / Unsupervised Conference, Features, Barging in on a Tandem Call, Hang up

Tandem Calls / Unsupervised Conference

Barging in on a Tandem Call	In these instructions:
	[Super Display Soft Key]
	[Keyset Soft Key]
To Barge In on a Tandem Call:

1.Do one of the following.

a.Press the line key for the busy line.

b.Press INTERCOM and dial the line’s Direct Line Access code (e.g., 101 for line 1).

•See Direct Line Access (page 115) for more.

2.Dial 4.

•You hear two beeps and you join the Tandem Call.

To place a Tandem Call on Hold (after Barging In):

1.Press HOLD.

•The tandem callers hear Music On Hold (if installed) while they wait on Hold.

•While on Hold, the tandem callers cannot talk to each other.

To rejoin a Tandem Call you have Placed on Hold:

1.Press CONF.

	Setting up a Tandem Call at a Single Line Telephone	In these instructions:
		[Super Display Soft Key]
		[Keyset Soft Key]
To set up a Tandem Call at a single line telephone:
1.	Establish an outside call.
2.	Hookflash and establish another outside call.
3.	Hookflash and dial #10 to set up a three-way Conference.
4.	Hang up.
	• If the outside parties disconnect, the lines you selected or your extension does not have Tandem Call capability.
	Using Line-to-Line Transfer to set up a Tandem Call	In these instructions:
		[Super Display Soft Key]
		[Keyset Soft Key]
To set up a Tandem Call via line-to-line Transfer:
1.	Place or answer an outside call.
2.	Press TRANSFER.
3.	Place or answer another outside call.
4.	Hang up to set up a Tandem Call between your initial call and new call.

Features

DSX Software Manual Features ◆ 343