Basic did Call Handling, Is Station Intercept programmed?

Direct Inward Dialing

DID Call Handling

The following steps illustrate how the system handles DID calls when the call is not intercepted by an exten- sion’s Call Forwarding or Extension Hunting.

Basic DID Call Handling

1.Is telco sending incorrect digits, or is there a DID Translation Table programming error?

1.If yes:

Vacant Intercept

The call normally follows the following Line Overﬂow programming.

-3112-01: Direct Termination in the Day (page 819)

-3112-02: Enable Day Overﬂow (page 819)

-3112-03: Day Overﬂow Destination (page 820)

2.If no, go to the next step for routing.

2.Is the destination extension allowed to receive DID calls?

1.If yes, go to the next step for routing.

-This occurs when 1401-08: Receive DID Calls (page 630) is Yes.

2.If no, the call immediately follows Line Overﬂow.

-This occurs when 1401-08: Receive DID Calls (page 630) is No.

3.Is the destination extension available?

1.If yes, the call rings the destination extension.

-If unanswered, go to the next step for routing.

2.If no, go to the next step for routing.

4.Is Station Intercept programmed?

1.If yes and the intercept condition is met, the call routes to the Station Intercept destination set up in:

-2115-02: DID Station Intercept Type (page 748).

-2115-02: DID Station Intercept Destination (page 748).

2.If yes and the intercept condition is not met, go to the next step for routing.

3.If no, go to the next step for routing.

5.Is DID Camp-On programmed (1401-09: Receive DID Camp-On(page 631) = Yes)?

1.If yes:

-If the extension is unanswered, the call follows Line Overﬂow.

-If the extension is busy or in DND, the call camps-on and then follows Line Overﬂow.

2.If no:

-If the extension is unanswered, the call follows Line Overﬂow.

-If the extension is busy or in DND, the call won’t go through (i.e., caller hears busy).

Features

DSX Software Manual

Features ◆ 101

P, N 1093100 specifications

The NEC P,N 1093092,1093092 is a high-performance electronic component renowned for its versatility and advanced technology. As part of NEC's extensive portfolio, this component is designed to meet the demanding requirements of various industries, including telecommunications, automotive, and consumer electronics.

One of the main features of the NEC P,N 1093092,1093092 is its impressive operational efficiency. This component offers low power consumption without compromising performance, making it an ideal choice for battery-operated devices and energy-sensitive applications. Its ability to function effectively at low voltage levels further enhances its appeal, allowing manufacturers to design smaller, more efficient products.

Another key characteristic of the NEC P,N 1093092,1093092 is its robust reliability and durability. With a temperature range that can withstand extreme conditions, the component ensures consistent performance even in harsh environments. This reliability is critical for applications in sectors like automotive, where components are often subject to vibrations, temperature fluctuations, and other stress factors.

Moreover, the NEC P,N 1093092,1093092 integrates advanced semiconductor technology that enables high frequency and high-speed processing capabilities. This feature makes it suitable for applications requiring fast data transmission, such as in telecommunications infrastructure and data centre operations. As technology continues to evolve, the demand for components that can handle high data rates becomes increasingly important, and the NEC P,N 1093092,1093092 is well-equipped to meet these needs.

In terms of design, the component boasts a compact form factor, which facilitates integration into various hardware configurations. This flexibility allows engineers and designers to utilize the NEC P,N 1093092,1093092 in diverse applications while maintaining space efficiency in device design.

Finally, the NEC P,N 1093092,1093092 complies with international standards, ensuring that it meets the stringent quality requirements set forth for electronic components. This compliance not only enhances the component's reliability but also simplifies the certification process for manufacturers, making it a strategic choice for projects that require adherence to industry regulations.

In summary, the NEC P,N 1093092,1093092 stands out as a cutting-edge electronic component characterized by its operational efficiency, reliability, processing capabilities, compact design, and compliance with quality standards. Its advanced features make it an essential component for modern electronic applications across various industries.

NEC P Basic did Call Handling, Is the destination extension allowed to receive did calls?

Models: P N 1093100