NEC N 1093100 PC Program System Administrator, Description, On-LineProgramming Direct Connection

Models: P N 1093100

1 984
Download 984 pages 47.76 Kb
Page 302
Image 302
PC Program (System Administrator)

PC Program (System Administrator)

PC Program (System Administrator)

Description

Use your PC or laptop to program the system remotely or while on-site.

The PC Program is a WindowsTM-based application you can use for programming the telephone system and maintaining site databases, instead of using the conventional telephone programming. The PC Program provides:

On-Line Programming (Direct Connection)

With the PC connected to the telephone system’s serial USB, or Ethernet port, you can make immediate changes to the telephone system programming. While connected, the PC Program also allows you to save your new data to a file on the PC hard disk, or upload a “template” database from your PC to the system.

Remote Programming

Using an IP or modem connection between your PC and the remote system, you can custom- ize a customer’s system without leaving your office. Specify what is required for IP and modem connections.

Off-Line Programming

With Off-Line Programming, the PC Program allows you to set up a database on your PC off line, connect to the telephone system, and upload the entire custom configuration.

Database Save and Restore

Use the PC Program to save a site’s data to your PC hard disk. You can easily restore the saved data later on, if required.

The PC Program has the following requirements:

Windows NT, 2000, XP and above.

P330 with 128 MB RAM.

256 color 800 x 600 display (1240 x 1024 optimal).

Do not use large fonts.

40 mBytes of available hard disk space.

272 Features

DSX Software Manual

Page 302
Image 302
NEC N 1093100 PC Program System Administrator, Description, On-LineProgramming Direct Connection, Remote Programming