Call Forwarding Off Premises

•An extension Speed Dial number stored in bin 719 should not be longer than 16 digits. If it is, the sys- tem automatically clears bin 719 when it stores an Off Premises Call Forwarding number in bin 720.

•An extension user cannot off premise call forward to a Personal Speed Dial bin that contains an Inter- com number. If the user selects a bin that contains an Intercom number, the system cancels Off Pre- mises Call Forwarding.

•Off Premises Call Forwarding is cleared after a system reset or power down.

•If a line rings an off-premise forwarded extension and the specified outbound route is busy, the sys- tem reroutes the call to the programmed overflow destination (normally Key Ring). Intercom callers will hear busy tone if the outbound route is busy, and have the option of dialing 2 for Line Queuing or Line Callback.

•Tandem Calling must be enabled for the originating line (i.e., the line that Off Premises Call Forward- ing will reroute).

-If a screened Transfer is made to an extension with Line Only forwarding, and Tandem Calling is not enabled for the originating line, the transferred line immediately goes to Key Ring when the transferring party hangs up.

-If a screened Transfer is made to an extension with All Calls forwarding, and Tandem Calling is not enabled for the originating line, the transferred line will stay at the transferring extension when that party hangs up.

•Off Premises Call Forwarding is not available at single line telephones.

Default Setting

•Call Forwarding Off Premises is disabled in an extension’s Class of Service.

•Tandem Calling is disabled for lines.

Programming

1.Should an extension be able to use Off Premises Call Forwarding?

1.In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.

2.If yes:

-In 1406-01: Call Forwarding Off-Premises(page 643), enter Yes.

-In 1406-02: Internal Call Forwarding (page 643), enter Yes.

-In 2111-09: Personal Speed Dial (page 734), enter Yes.

3.If no, in 1406-01: Call Forwarding Off-Premises(page 643) enter No.

2.Should Off Premises Call Forwarding be able to reroute incoming outside calls?

1.If yes, in 3103-04: Tandem Calls (page 816) enter Yes.

2.If no, in 3103-04: Tandem Calls (page 816) enter No.

3.Do you want to enter the Personal Speed Dial numbers an extension will use for Off Premises Call Forwarding from system programming?

1.If yes, in 215x-Speed Dial (Personal) (page 775) enter Personal Speed Dial numbers for the extension.

-Off Premises Call Forwarding cannot use Intercom Speed Dial.

2.If no, skip this step.

52 ◆ Features

DSX Software Manual

Page 81 Page 83
Page 82
Image 82
NEC N 1093100 software manual Programming
Page 81 Page 83

P, N 1093100 specifications

The NEC P,N 1093092,1093092 is a high-performance electronic component renowned for its versatility and advanced technology. As part of NEC's extensive portfolio, this component is designed to meet the demanding requirements of various industries, including telecommunications, automotive, and consumer electronics.

One of the main features of the NEC P,N 1093092,1093092 is its impressive operational efficiency. This component offers low power consumption without compromising performance, making it an ideal choice for battery-operated devices and energy-sensitive applications. Its ability to function effectively at low voltage levels further enhances its appeal, allowing manufacturers to design smaller, more efficient products.

Another key characteristic of the NEC P,N 1093092,1093092 is its robust reliability and durability. With a temperature range that can withstand extreme conditions, the component ensures consistent performance even in harsh environments. This reliability is critical for applications in sectors like automotive, where components are often subject to vibrations, temperature fluctuations, and other stress factors.

Moreover, the NEC P,N 1093092,1093092 integrates advanced semiconductor technology that enables high frequency and high-speed processing capabilities. This feature makes it suitable for applications requiring fast data transmission, such as in telecommunications infrastructure and data centre operations. As technology continues to evolve, the demand for components that can handle high data rates becomes increasingly important, and the NEC P,N 1093092,1093092 is well-equipped to meet these needs.

In terms of design, the component boasts a compact form factor, which facilitates integration into various hardware configurations. This flexibility allows engineers and designers to utilize the NEC P,N 1093092,1093092 in diverse applications while maintaining space efficiency in device design.

Finally, the NEC P,N 1093092,1093092 complies with international standards, ensuring that it meets the stringent quality requirements set forth for electronic components. This compliance not only enhances the component's reliability but also simplifies the certification process for manufacturers, making it a strategic choice for projects that require adherence to industry regulations.

In summary, the NEC P,N 1093092,1093092 stands out as a cutting-edge electronic component characterized by its operational efficiency, reliability, processing capabilities, compact design, and compliance with quality standards. Its advanced features make it an essential component for modern electronic applications across various industries.
Top Page Image Contents