NEC N 1093100 User Programmable Features, Programming and Dialing System Speed Dial

								Speed Dial
		Programming and Dialing System Speed Dial					In these instructions:
							[Super Display Soft Key]
							[Keyset Soft Key]
	a.	Enter the line number you want the system to use when dialing your stored number (1-64).
	b.	Enter the Line Group number you want the system to use when dialing your stored number (90-98).
	c.	Press INTERCOM if you want to enter Intercom codes.
6.	Press HOLD.
7.	Enter the number you want to store (up to 32 digits long).
	• If storing Intercom codes, you can enter a valid dial sequence using the digits 0-9, #, and *.
	• To insert a pause, press MUTE. To insert a Flash, press FLASH.
	• Do not enter a pause or flash into an Intercom code.
8.	Press HOLD twice.
9.	Enter a name for the Speed Dial number.
	• See Name Programming Chart (page 322) for more.
10.	Press HOLD.
11.	Do one of the following.
	a.	Repeat from step 3 to program another bin.
	b.	Press SPEAKER to exit.
To dial a stored System Speed Dial number:
1.	Do one of the following.
	a.	Press INTERCOM, dial #, then dial the System Speed Dial bin number (normally 201-299).
	c.	Press a Feature Key set up as a System Speed Dial key.
2.	(Optional)	• To chain bins, wait for the first bin to dial out, then press a bin key or Feature Key.
		• If the programmed route is busy, press an idle line key to reroute the call.
	User Programmable Features
				Programming Personal Speed Dial
	Feature		Mnemonic			Operation			Access Level
	Speed Dial		#SP (#77)		#SP + Press bin key (for bins 701-710) + HOLD + Enter				1-5
					outside line (e.g., 1), Line Group (90-98), or INTERCOM
					for Intercom feature + HOLD + Number to store + HOLD
					twice + Name + HOLD + Press another bin key or
					SPEAKER to exit.

Features

DSX Software Manual Features ◆ 321