NEC N 1093100 Programming, Hold Recall Display, Features, Conditions, Default Setting

Hold

Hold Recall Display

The Hold recall display identifies:

❥The type of call recalling the extension.

❥The extension which initially placed the call on Hold.

The Hold recall displays occurs as the call is ringing the extension that initially placed it on Hold, and after the call diverts to Key Ring.

Conditions

• None

Default Setting

• System Hold, Exclusive Hold and Automatic Hold enabled.

Programming

1.While busy on a call, should pressing a line key or Call Coverage key put the initial call on Hold?

1.In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.

2.If yes, 1411-03: Automatic Hold (page 647) enter Yes.

3.If no, in 1411-03: Automatic Hold (page 647) enter No.

2.Does an unanswered call on System Hold recall the extension that placed it on Hold after the desired interval?

1.If yes, leave 1603-02: Hold Recall Timer (page 675) at its current setting.

2.If no, adjust 1603-02: Hold Recall Timer (page 675) as required.

3.Does an unanswered call on Exclusive Hold recall the extension that placed it on Hold after the desired interval?

1.If yes, leave 1603-03: Exclusive Hold Recall Timer (page 675) at its current setting.

2.If no, adjust 1603-03: Exclusive Hold Recall Timer (page 675) as required.

3.Does an unanswered Hold recall divert to Key Ring after the desired interval?

1.If yes, leave 1601-01: Line No Answer Timer (page 669) at its current setting.

2.If no, adjust 1601-01: Line No Answer Timer (page 669) as required.

Features

DSX Software Manual Features ◆ 203