NEC Extension Hunting, Programming, Setting Up Circular Hunting, Setting Up Terminal Hunting

Extension Hunting

Programming

Setting Up Circular Hunting

1.Assign the hunt type to each extension in a Circular Hunting Group?

1.In 2115-01: Hunt Type (page 746), assign the hunt type for each extension in the group.

-1 = Ring No Answer Outside Calls

-2 = Busy/Ring No Answer Outside Calls

-3 = Busy/Ring No Answer All Calls

-4 = Busy Outside Calls

2.Set up the hunt destination routing.

1.In 2115-01: Hunt Destination (page 746), set up the circular hunt routing.

-Each extension should route to the next in the group.

-The last extension should route back to the second. See the Overview of Circular Hunting (page 154) chart for more.

3.Do calls ring a hunt group member for the correct interval before routing to the next extension?

1.If yes:

-Leave 1601-03: Call Forward No Answer Timer (page 670) and 1603-01: Transfer Recall Timer (page 675) at their current settings.

2.If no:

-To change how long the first member of the group rings, adjust 1603-01: Transfer Recall Timer (page 675) as required.

-To change how long the next and succeeding members of the group ring, adjust 1601-03: Call For- ward No Answer Timer (page 670) as required.

4.Do DILs ring a hunt group member for the correct interval before routing to the next extension?

1.If yes, leave 1601-02: DIL No Answer Timer (page 669) at its current setting.

2.If no, adjust 1601-02: DIL No Answer Timer (page 669) as required.

Setting Up Terminal Hunting

1.Assign the hunt type to each extension in a Terminal Hunting Group?

1.In 2115-01: Hunt Type (page 746), assign the hunt type for each extension in the group.

-1 = Ring No Answer Outside Calls

-2 = Busy/Ring No Answer Outside Calls

-3 = Busy/Ring No Answer All Calls

-4 = Busy Outside Calls

2.Set up the hunt destination routing.

1.In 2115-01: Hunt Destination (page 746), set up the terminal hunt routing.

-Each extension (except the last) should route to the next in the group.

-For the last extension, press CLEAR to undefine the hunt assignment.

Features

DSX Software Manual Features ◆ 157