Reverse Voice Over

Reverse Voice Over

Description

Privately call a co-worker while you’re busy on your handset.

While on a handset call, Reverse Voice Over lets a busy keyset user make a private Intercom call to an idle co-worker. The busy user just presses and holds down a programmed Reverse Voice Over key to make a pri- vate call to the assigned co-worker. The initial caller cannot hear the Reverse Voice Over conversation. The private Intercom call continues until the Reverse Voice Over caller releases the key again. The initial handset call can be an outside call or an Intercom call. An extension can have Reverse Voice Over keys for more than one co-worker.

Reverse Voice Over could help a salesperson, for example, when placing a call to an important client. The salesperson can talk with the client and give special instructions to an assistant — without interrupting the initial call.

When the keyset is idle, the Reverse Voice Over key functions the same as a Hotline key. The key also shows at a glance the status of the associated extension:

Reverse Voice Over Busy Lamp Indications

When the key is:

The covered extension is:

 

 

Off

Idle or not installed

 

 

On

Busy or ringing

 

 

Medium Flash

Assigned extension is in DND for outside

 

calls (option 1)

 

 

Fast Flash

Assigned extension is in DND for Intercom

 

calls (option 2) or All Calls (option 3)

 

 

Reverse Voice Over uses a system Conference circuit while it is active. The following table shows the sys- tem’s Conference capacities:

 

 

Description

Capacity

 

 

Conference circuits

32

 

 

Maximum simultaneous users in Conference

32

(total of all Conferences system-wide)

 

 

 

Maximum simultaneous conferences

8

 

 

Maximum parties in any one Conference

8

(lines and/or extensions)

 

 

 

 

 

The system’s 32 Conference circuits are dynamically allocated as users request them.

Conditions

• None

Default Setting

• No Reverse Voice Over keys assigned.

Features

DSX Software Manual

Features 289

Page 319
Image 319
NEC N 1093100 software manual Reverse Voice Over, Privately call a co-worker while you’re busy on your handset

P, N 1093100 specifications

The NEC P,N 1093092,1093092 is a high-performance electronic component renowned for its versatility and advanced technology. As part of NEC's extensive portfolio, this component is designed to meet the demanding requirements of various industries, including telecommunications, automotive, and consumer electronics.

One of the main features of the NEC P,N 1093092,1093092 is its impressive operational efficiency. This component offers low power consumption without compromising performance, making it an ideal choice for battery-operated devices and energy-sensitive applications. Its ability to function effectively at low voltage levels further enhances its appeal, allowing manufacturers to design smaller, more efficient products.

Another key characteristic of the NEC P,N 1093092,1093092 is its robust reliability and durability. With a temperature range that can withstand extreme conditions, the component ensures consistent performance even in harsh environments. This reliability is critical for applications in sectors like automotive, where components are often subject to vibrations, temperature fluctuations, and other stress factors.

Moreover, the NEC P,N 1093092,1093092 integrates advanced semiconductor technology that enables high frequency and high-speed processing capabilities. This feature makes it suitable for applications requiring fast data transmission, such as in telecommunications infrastructure and data centre operations. As technology continues to evolve, the demand for components that can handle high data rates becomes increasingly important, and the NEC P,N 1093092,1093092 is well-equipped to meet these needs.

In terms of design, the component boasts a compact form factor, which facilitates integration into various hardware configurations. This flexibility allows engineers and designers to utilize the NEC P,N 1093092,1093092 in diverse applications while maintaining space efficiency in device design.

Finally, the NEC P,N 1093092,1093092 complies with international standards, ensuring that it meets the stringent quality requirements set forth for electronic components. This compliance not only enhances the component's reliability but also simplifies the certification process for manufacturers, making it a strategic choice for projects that require adherence to industry regulations.

In summary, the NEC P,N 1093092,1093092 stands out as a cutting-edge electronic component characterized by its operational efficiency, reliability, processing capabilities, compact design, and compliance with quality standards. Its advanced features make it an essential component for modern electronic applications across various industries.