NEC Fax Detection, Description, Programming, Other Related Features, Operation, Conditions

Fax Detection

Fax Detection

Description

Automatically transfer incoming fax calls to a fax machine.

The Automated Attendant can detect incoming fax calls and transfer them to a fax machine. With Fax Detec- tion enabled, after the Automated Attendant answers a call it listens for incoming fax CNG tone. If it detects the tone, it does an unscreened transfer of the call to the specified company fax machine. The incoming fax then prints out on the company fax machine. If you disable Fax Detection, the Automated Attendant will not detect and route incoming fax calls.

Conditions

• None

Default Setting

• Disabled

Programming

1.To set up Fax Detection for a Call Routing Mailbox:

1.In 4222-04: Fax Detection (page 892), enter Yes.

2.In 4222-05: Fax Extension (page 892), specify the extension that should receive faxes from the Call Routing Mailbox.

-Normally, this is the extension number of the analog port to which the fax machine is connected (e.g., 320).

2.To set up Fax Detection for a Directory Dialing Mailbox:

1.In 4224-08: Fax Detection (page 899), enter Yes.

2.In 4224-09: Fax Transfer Extension (page 900), specify the extension that should receive faxes from the Call Routing Mailbox.

-Normally, this is the extension number of the analog port to which the fax machine is connected (e.g., 320).

Other Related Features

None

Operation

N/A

Features IntraMail

DSX Software Manual IntraMail Features ◆ 485