NEC N 1093100 Call Forwarding Timers and Voice Mail, 1603-01:Transfer Recall Timer, Features

Models: P N 1093100

1 984
Download 984 pages 47.76 Kb
Page 404
Image 404
Call Forwarding Timers and Voice Mail

Voice Mail

Call Forwarding Timers and Voice Mail

The following diagram shows how the system handles an outside call transferred to an extension that is for- warded to voice mail.

Transferred Outside Call to Forwarded Extension

1603-01: Transfer Recall Timer

(page 675)

1601-03: Call Forward No Answer

Timer (page 670)

1601-03: Call Forward No Answer

Timer (page 670)

Extension A transfers line to extension B, which is forwarded Busy/No Answer (type 2) to exten- sion C.

The line rings extension B for the Transfer Recall time. See Transfer (page 358) for more.

If unanswered, the call then rings extension C (the forward destination) for the Call Forward Ring No Answer time.

If still unanswered, the call rings the extension that initially transferred the call (A) for the Call Forward Ring No Answer time.

374 ◆ Features If still unanswered, call diverts to Key Ring.

Conditions

If an extension has a flashing Ring/Message lamp and the system resets or power fails, the lamp con- tinues to flash after the system restarts.

When using SLIU PCBs, the number of external voice mail ports you can install is limited by avail- able system DTMF receivers.

When the system rings an idle voice mail port, it will continue to ring the port until answered. The call will not cycle to a another member of the UCD Group (as it will for voice calls).

The system will never send a loop supervision disconnect signal (i.e., drop pulse) to voice mail ports.

Default Setting

• Voice mail is not installed.

374 Features

DSX Software Manual

Page 404
Image 404
NEC N 1093100, P Call Forwarding Timers and Voice Mail, Transferred Outside Call to Forwarded Extension, Conditions