NEC Screened Transfer, Programming, Other Related Features, Operation, IntraMail Features

Models: P N 1093100

1 984
Download 984 pages 47.76 Kb
Page 599
Image 599
Forced Unscreened Transfer (page 489)

Screened Transfer

Programming

1.Assign the STRF action to a key on the active Dial Action Table.

1.In 4231-Digit Assignment (page 901), enter 1 to assign an available key for Screened Transfer (STRF).

2.Normally, the corresponding Routing option should be XXX. Note that the key you choose for this action is the first digit of the called extension number.

-For example, to allow callers to place Screened Transfers to extensions 300-399, for key 3 enter STRF for the Action and XXX for the corresponding Routing.

3.To have Screened Transfer call a specific extension, the corresponding Routing option should be that extension’s number. The caller then dials that single digit to reach the extension.

-For example, to have callers dial 8 to reach extension 303, for key 8 enter STRF for the Action and 303 for the corresponding Routing.

2.Set how long a Screened Transfer will ring an unanswered extension before recalling to the Automated Attendant.

4.In 4222-03: Screened Transfer Timeout (page 891), set how long a Screened Transfer (STRF) from the Automated Attendant will ring (0-255seconds) an unanswered extension before recalling.

Other Related Features

Features

None

IntraMail Features

Answer Tables (page 420)

Determines how the Automated Attendant answers outside calls on each line.

Automated Attendant (page 433)

The Answer Table determines how the Automated Attendant answers calls.

Call Routing Mailbox (page 450)

The mailbox associated with an Answer Table that specifies which dialing options (Dial Action Table) and announcements are available to Automated Attendant callers.

You cannot program a Call Routing Mailbox as a Screened Transfer (STRF) Dial Action Table destination. Caller ID and Voice Mail (page 456)

IntraMail provides Caller ID data for a Screened Transfer call after it is answered.

Dial Action Table (page 465)

Defines the dialing options for the Call Routing Mailbox chosen by the active Answer Table.

Forced Unscreened Transfer (page 489)

The Subscriber Mailbox can optionally convert Automated Attendant Screened Transfers to Unscreened Transfers.

Unscreened Transfer (page 587)

After an Automated Attendant caller dials an extension, IntraMail immediately transfers the call to the destination and hangs up.

Operation

N/A

Features

IntraMail

 

 

DSX Software Manual

IntraMail Features 569

Page 599
Image 599
NEC Screened Transfer, Programming, Other Related Features, Operation, IntraMail Features, Answer Tables page