NEC P Line Group Routing, Description, Features, Conditions, Default Setting DSX-80/160, DSX-40

Models: P N 1093100

1 984
Download 984 pages 47.76 Kb
Page 253
Image 253
Line Group Routing

Line Group Routing

Line Group Routing

Description

Dial a single code to place a call over the first available line in a Line Group.

With Line Group Routing enabled, an extension user can just press INTERCOM and dial 9 to place an out- side call. Line Group Routing automatically selects the first available line in the extension’s programmed “dial 9” Line Group. This simplifies placing calls in systems that have a lot of lines for outgoing calls. Rather than press one of many line keys, the user just dials 9 instead.

Conditions

Systems using Line Groups or Line Group Routing should use the hybrid FCC registration number (i.e., the number that ends in MF-E). Look at the label on the bottom of your equipment cabinet for more information.

If you include a line in your “dial 9” group that is not physically connected, when a user dials 9 the system will:

-Try the line up to 5 times.

-Mark it as failed.

-Automatically exclude it from the “dial 9” group.

Default Setting

DSX-80/160

Lines 1-12 ring on line keys 1-12 for extensions 300-315. All other extensions are lamp only for lines 1-12. Lines 13-64 do not appear on line keys.

All extensions have full access on all lines.

Line Group Routing (dial 9) is assigned to Line Group 90 (which contains lines 1-8). Dial 9 works by default. The outgoing line priority for the dial 9 group is as follows:

-Order 1 for line 8

-Order 2 for line 7

-Order 3 for line 6

-Order 4 for line 5

-Order 5 for line 4

-Order 6 for line 3

-Order 7 for line 2

-Order 8 for line 1

DSX-40

Keys 1-8 are line keys for lines 1-8.

All extensions have full access on all lines.

Lines 5-8 require the Expansion Board.

Line Group Routing (dial 9) is assigned to Line Group 90 (which contains lines 1-8). Dial 9 works by default. The outgoing line priority for the dial 9 group is as follows:

-Order 1 for line 8

-Order 2 for line 7

-Order 3 for line 6

-Order 4 for line 5

-Order 5 for line 4

-Order 6 for line 3

-Order 7 for line 2

-Order 8 for line 1

Features

DSX Software Manual

Features 223

Page 253
Image 253
NEC P Line Group Routing, Description, Features, Conditions, Default Setting DSX-80/160, DSX-40, DSX Software Manual