NEC N 1093100 Account Codes, 4.In 3511-01:Active Key Pad page 840, enter Yes, Features

Account Codes

2.Forced Account Codes Allow 800 and 1 + 800 Long Distance Dialing without an Account Code.

1.In 1412-04: Forced Account Codes (page 651), enter Yes.

2.In 1412-06: Account Codes for Toll Calls Only (page 651), enter Yes.

3.In 1551-04: Account Code Toll Restriction Level (page 668), enter 2 (for example).

Make the following entries for Toll Restriction Level 2.

4.In 3511-01: Active Key Pad (page 840), enter Yes.

In 3512-04: Allow N11 Dialing (page 842), enter Yes.

In 3512-01: Allow 0 + XXX Operator Assisted Dialing (page 841), enter Yes.

In 3512-03: Allow 101x Equal Access Dialing (page 841), enter Yes.

5.In 352x-1010-XXX / Local XXX (Equal Access Dialing) (page 844), make a deny table with no entries (i.e., deny nothing). This is the default setting.

6.In 353x-1+XXX /TBL-A XXX (NPA/NXX Dialing 3-Digit Table) (page 846), make an allow table and enter 800.

7.In 354x-1+XXX-XXX /TBL-A XXXXXXX (1 + NPA + NXX Dialing 6-Digit Table) (page 848), make a deny table with no entries (i.e., deny nothing). This is the default entry.

8.In 355x-XXX /TBL-B-XXX (NPA/NXX Dialing 3-Digit Table) (page 850), make an allow table and enter

800.

9.In 356x-XXX-XXX /TBL-B XXXXXX (NPA + NXX Dialing 6-Digit Table) (page 852), make a deny table with no entries (i.e., deny nothing). This is the default setting.

10.In 2102-01: Class of Service (page 724), assign the Class of Service with Forced Account Codes enabled to the extension.

With this programming, an extension user can:

1.Press a line key or dial a code for an outside line.

2.Wait for a reminder tone (3 beeps).

•With Forced Account Codes enabled, the system automatically goes into the Account Code mode after you press a line key in step 1 above.

•If you have an Account Code Feature Key, it flashes green.

3.If dialing a 1 + 800 or 800 call, skip this step.

If dialing any other long distance call, dial the Account Code.

4.Press # (if enabled), the Account Code soft key, or an Account Code Feature Key (if programmed).

5.Dial the outside number.

•The call will go through without an Account Code. If the user doesn’t enter an Account Code for all other calls, the system will cut off the call.

•The system will also cut off any call not allowed by the extension’s Toll Restriction programming.

18 ◆ Features DSX Software Manual