NEC N 1093100 Toll Restriction, Programming, Basic Setup, Equal Access Dialing Restrictions

Toll Restriction

Programming

Basic Setup

1.To set up Toll Restriction Tables prior to programming:

1.In 3501-01: Toll Restriction Country Type (page 839), set the Toll Restriction Country Type.

-For systems installed in North America, you should select US Domestic (1).

2.Assign a Toll Restriction level to an extension.

1.In 2102-02: Station Toll Level (Day) (page 724) and 2102-03: Station Toll Level (Night) (page 724), assign a Toll Restriction level to an extension.

3.Do you want to enable Active Key Pad (Continuous Dialing)?

1.If yes, in 3511-01: Active Key Pad (page 840) enter Yes.

2.If no, in 3511-01: Active Key Pad (page 840) enter No.

4.Do you want to enable N11 dialing?

1.If yes, in 3512-04: Allow N11 Dialing (page 842) enter Yes.

2.If no, in 3512-04: Allow N11 Dialing (page 842) enter No.

5.Do you want to enable 0+ (Operator Assisted) dialing?

1.If yes, in 3512-01: Allow 0 + XXX Operator Assisted Dialing (page 841) enter Yes.

2.If no, in 3512-01: Allow 0 + XXX Operator Assisted Dialing (page 841) enter No.

6.Do you want to enable International (011) dialing?

1.If yes, in 3512-02: Allow 011 + XXX International Dialing (page 841) enter Yes.

2.If no, in 3512-02: Allow 011 + XXX International Dialing (page 841) enter No.

Equal Access Dialing Restrictions

1.Do you want to enable the dialing of Equal Access Codes 1011 through 1019?

1.If yes, in 3512-03: Allow 101x Equal Access Dialing (page 841) enter Yes.

2.If no, in 3512-03: Allow 101x Equal Access Dialing (page 841) enter No.

2.Do you want to allow Equal Access 1010 + XXX dialing?

1.If yes, in 352x-1010-XXX / Local XXX (Equal Access Dialing) (page 844) set up the Equal Access dial- ing Table.

-Be sure to initialize the table before programming it for the first time.

-You can make the table a deny table and enter just the codes you want to restrict, or

-You can make the table an allow table and enter just the codes you want to allow.

-By default, this type of dialing is allowed because the table is a deny table with no entries (i.e., it denies nothing).

354 ◆ Features DSX Software Manual