NEC N 1093100 Walking Class of Service, Description, Programming, Conditions, Default Setting

Models: P N 1093100

1 984
Download 984 pages 47.76 Kb
Page 422
Image 422
Walking Class of Service

Walking Class of Service

Walking Class of Service

Description

An extension user can temporarily use their Toll Restriction and Class of Service options at a co-worker’s phone.

Walking Class of Service allows an extension user to temporarily implement their Toll Restriction and Class of Service settings at a co-worker’s keyset. This is normally used to override dialing restrictions at a tele- phone. For example, an executive with an unrestricted phone can walk to any keyset in the building, imple- ment Walking Class of Service, and dial without restriction. After the keyset goes idle, Walking Class of Service remains in effect for 10 seconds. This permits the user to make multiple calls before the keyset returns to its normal restrictions.

Walking Class of Service and Extension Locking

Walking Class of Service overrides Extension Locking. For example:

Extension 301 is permitted by their Class of Service and Toll Restriction to use Paging and place long distance calls.

Extension 306 locks their extension. While locked, Class of Service 15 prevents Paging and Toll Level 7 prevents long distance calls. These features are no longer available at extension 306.

The extension 301 user goes to extension 306 and implements Walking Class of Service.

The extension 301 user can then use 306 to make long distance calls and Page (even though 306 was locked to prevent those features).

Conditions

• None

Default Setting

• Day and Night Walking Class of Service disabled in an extension’s Class of Service.

Programming

1.Should extension have Walking Class of Service capability?

1.In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.

2.If yes:

-For day mode Walking Class of Service, in 1412-01: Walking Class of Service (Day) (page 649), enter Yes.

-For night mode Walking Class of Service, in 1412-02: Walking Class of Service (Night) (page 649), enter Yes.

-In 2102-05: Station PIN Code (page 725), enter the extension’s PIN code (four digits, using 0-9, # and *).

3.If no:

-To prevent day mode Walking Class of Service, in 1412-01: Walking Class of Service (Day) (page 649), enter No.

-To prevent night mode Walking Class of Service, in 1412-02: Walking Class of Service (Night) (page 649), enter No.

392 Features

DSX Software Manual

Page 422
Image 422
NEC N 1093100 Description, Programming, Walking Class of Service and Extension Locking, Conditions, Default Setting