NEC P Features, Operation, Using Reverse Voice Over, To place a call using Reverse Voice Over

				Reverse Voice Over
	Operation
			Using Reverse Voice Over		In these instructions:
					[Super Display Soft Key]
					[Keyset Soft Key]
To place a call using Reverse Voice Over:
1.		While on a handset call, press and hold your Reverse Voice Over key.
		• You hear two beeps, then you can talk to your co-worker.
		• The key lights red as you press it.
To return to your initial caller:
1.		Release your Reverse Voice Over key.
		• The key goes out.
To place a call to your Reverse Voice Over partner:
1.		While your telephone is idle, press your Reverse Voice Over key.
		• You hear two beeps, then you can talk to your co-worker. (Optionally lift handset for privacy.)
		• The key lights green.
To Transfer a call using your Reverse Voice Over key:
1.		While on a call, press TRANSFER.
2.		Press your Reverse Voice Over key.
3.		Do one of the following.
		a.	• Announce the call to make a Screened Transfer.
			• Hang up.
		b.	Press the flashing line key to return to the call if your co-worker doesn’t want it.
		c.	Hang up to send the call through unscreened.
			• The call will recall to you if unanswered at the destination. If you don’t answer the recall, it
			diverts to Key Ring.

Features

DSX Software Manual Features ◆ 291