Conversation Record

3.Enable the Conversation Record Beep and Warning.

1.In 2143-05: Recording Conversation Beep (page 771), enter Yes.

-If enabled, all parties on a call being recorded will hear the voice prompt Recording followed by a beep when the extension user initiates Conversation Record. If disabled, the voice prompt and beep will not occur.

-Disabling this option may be interpreted as an invasion of privacy.

4.Set the maximum length of recorded conversations.

1.In 4201-02: Incoming Message Length (page 872), enter the maximum length of recorded conversations (1-4095seconds).

-The length of a recorded conversation is 10 times this interval.

-Since the Conversation Record time cannot exceed 4095 seconds, any settings in this option larger than 409 have no effect on the length of recorded conversations.

Other Related Features

Features

None

IntraMail Features

Subscriber Mailbox (page 574)

Conversation Record is only available to subscriber extensions.

Operation

Conversation Record

[Super Display Soft Key] - [Keyset Soft Key]

To record your active call in your mailbox:

•Only one party on a call can use Conversation Record at any one time. This includes Intercom calls and Conference calls.

1.Do one of the following.

a.

[Record] [More + Rec]

Select to enable Conversation Record.

 

 

•The Conversation Record soft key is only available for outside calls.

b. Press your Conversation Record Feature Key.

•The record key can be assigned to yours or a co-worker’s mailbox.

•The key will flash fast (green) on your keyset; flash fast (red) on your DSS Console.

2.Once recording begins:

•You and your caller hear the voice prompt “Recording.”

•You see: RECORD MAILBOX XXX

(where XXX is the number of the mailbox into which the conversation is recording).

To turn Conversation Record off:

1.Do one of the following.

•The portion of the call already recorded is sent to your mailbox as a new message.

a.Press V-MAIL.

b.Press a Record Feature Key on your extension or DSS Console.

Features

IntraMail

 

 

DSX Software Manual

IntraMail Features ◆ 463

Page 492 Page 494
Page 493
Image 493
NEC P, N 1093100 Enable the Conversation Record Beep and Warning, Recording Conversation Beep page 771, enter Yes
Page 492 Page 494

P, N 1093100 specifications

The NEC P,N 1093092,1093092 is a high-performance electronic component renowned for its versatility and advanced technology. As part of NEC's extensive portfolio, this component is designed to meet the demanding requirements of various industries, including telecommunications, automotive, and consumer electronics.

One of the main features of the NEC P,N 1093092,1093092 is its impressive operational efficiency. This component offers low power consumption without compromising performance, making it an ideal choice for battery-operated devices and energy-sensitive applications. Its ability to function effectively at low voltage levels further enhances its appeal, allowing manufacturers to design smaller, more efficient products.

Another key characteristic of the NEC P,N 1093092,1093092 is its robust reliability and durability. With a temperature range that can withstand extreme conditions, the component ensures consistent performance even in harsh environments. This reliability is critical for applications in sectors like automotive, where components are often subject to vibrations, temperature fluctuations, and other stress factors.

Moreover, the NEC P,N 1093092,1093092 integrates advanced semiconductor technology that enables high frequency and high-speed processing capabilities. This feature makes it suitable for applications requiring fast data transmission, such as in telecommunications infrastructure and data centre operations. As technology continues to evolve, the demand for components that can handle high data rates becomes increasingly important, and the NEC P,N 1093092,1093092 is well-equipped to meet these needs.

In terms of design, the component boasts a compact form factor, which facilitates integration into various hardware configurations. This flexibility allows engineers and designers to utilize the NEC P,N 1093092,1093092 in diverse applications while maintaining space efficiency in device design.

Finally, the NEC P,N 1093092,1093092 complies with international standards, ensuring that it meets the stringent quality requirements set forth for electronic components. This compliance not only enhances the component's reliability but also simplifies the certification process for manufacturers, making it a strategic choice for projects that require adherence to industry regulations.

In summary, the NEC P,N 1093092,1093092 stands out as a cutting-edge electronic component characterized by its operational efficiency, reliability, processing capabilities, compact design, and compliance with quality standards. Its advanced features make it an essential component for modern electronic applications across various industries.
Top Page Image Contents