Forced Unscreened Transfer, Screened Transfer

Forced Unscreened Transfer

Description

Automatically converts Automated Attendant Screened Transfers to Unscreened Transfers.

A Subscriber Mailbox can optionally convert Automated Attendant Screened Transfers to Unscreened Transfers. Enable this option for a mailbox if the subscriber prefers to receive all calls sent by the Automated Attendant as Unscreened Transfers. With Unscreened Transfers,

❥Calls from the Automated Attendant ring like other transferred calls and display the incoming Caller ID data (if provided by telco and enabled in programming) as the call is ringing.

❥As with Screened Transfers, unanswered calls route to the subscriber’s greeting (recorded or default) so the caller can leave a message. However, with Unscreened Transfer the caller cannot dial 2 to reach the Next Call Routing Mailbox options (if programmed).

Conditions

• None

Default Setting

• Disabled.

Programming

1.To enable Forced Unscreened Transfer for the Subscriber Mailbox: 1. In 2144-02: Forced Unscreened Transfer (page 772), enter Yes.

Other Related Features

Features

None

IntraMail Features

Dial Action Table (page 465)

If enabled in the Subscriber Mailbox, IntraMail automatically converts any Screened Transfers (STRFs) to the subscriber’s extension to Unscreened Transfers (UTRFs).

Screened Transfer (page 567)

After the Automated Attendant caller dials an extension, IntraMail calls (screens) the destination extension to see if the transfer can go through.

Unscreened Transfer (page 587)

After an Automated Attendant caller dials an extension, IntraMail immediately transfers the call to the extension and hangs up.

Operation

N/A

Features	IntraMail

DSX Software Manual

IntraMail Features ◆ 489

P, N 1093100 specifications

The NEC P,N 1093092,1093092 is a high-performance electronic component renowned for its versatility and advanced technology. As part of NEC's extensive portfolio, this component is designed to meet the demanding requirements of various industries, including telecommunications, automotive, and consumer electronics.

One of the main features of the NEC P,N 1093092,1093092 is its impressive operational efficiency. This component offers low power consumption without compromising performance, making it an ideal choice for battery-operated devices and energy-sensitive applications. Its ability to function effectively at low voltage levels further enhances its appeal, allowing manufacturers to design smaller, more efficient products.

Another key characteristic of the NEC P,N 1093092,1093092 is its robust reliability and durability. With a temperature range that can withstand extreme conditions, the component ensures consistent performance even in harsh environments. This reliability is critical for applications in sectors like automotive, where components are often subject to vibrations, temperature fluctuations, and other stress factors.

Moreover, the NEC P,N 1093092,1093092 integrates advanced semiconductor technology that enables high frequency and high-speed processing capabilities. This feature makes it suitable for applications requiring fast data transmission, such as in telecommunications infrastructure and data centre operations. As technology continues to evolve, the demand for components that can handle high data rates becomes increasingly important, and the NEC P,N 1093092,1093092 is well-equipped to meet these needs.

In terms of design, the component boasts a compact form factor, which facilitates integration into various hardware configurations. This flexibility allows engineers and designers to utilize the NEC P,N 1093092,1093092 in diverse applications while maintaining space efficiency in device design.

Finally, the NEC P,N 1093092,1093092 complies with international standards, ensuring that it meets the stringent quality requirements set forth for electronic components. This compliance not only enhances the component's reliability but also simplifies the certification process for manufacturers, making it a strategic choice for projects that require adherence to industry regulations.

In summary, the NEC P,N 1093092,1093092 stands out as a cutting-edge electronic component characterized by its operational efficiency, reliability, processing capabilities, compact design, and compliance with quality standards. Its advanced features make it an essential component for modern electronic applications across various industries.

NEC P, N 1093100 software manual Forced Unscreened Transfer, Screened Transfer

Models: P N 1093100