Extension Hunting

Calls to the “dummy” extension activate the Call Coverage keys on the covering extensions.

Co-workers can transfer calls into the group. They will ring all Call Coverage keys for the group. If unan- swered, a call transferred into the group follows the programmed UCD Group overflow destination (as do unanswered calls). It will not recall to the transferring party.

A UCD Master night key for the group will control the night termination of any Direct Inward Lines (DILs) terminated to the group. For example, you can have a DIL to the UCD Group during the day (e.g.,

701)and IntraMail at night (e.g., 700). When an extension user presses the UCD Master night key for the group, the DILs route to IntraMail.

DILs to the group ring the Call Coverage keys on the covering extensions.

UCD Hunting Notes:

Unanswered transferred calls and DILs continue to cycle through the UCD Group as long as an agent is available.

Placing an extension in Do Not Disturb temporarily removes it from the UCD Group.

Intercom calls to the UCD Group master number always ring the agent extensions.

You can set up a UCD Group to overflow to voice mail. Use 2302-01: UCD Group Overflow Destination

(page 792) to set up this option. Do not use 3112-03: Day Overflow Destination (page 820).

-If a call into a UCD Group overflows to voice mail, it is picked up by the UCD Group Mailbox. See Group Mailbox (page 497) for more.

To put DILs to a UCD Group master number into the night mode, press a uniquely programmed System Mode UCD Master Night key. See Night Service / Night Ring (page 252) for more.

Conditions

• None

Default Setting

Hunting is not set up.

UCD Group master numbers are predefined as shown in the following table. If required, you can reas- sign the UCD Group master numbers in 1315-01: UCD Group Master Extension Number (page 627).

UCD Group Default Assignments

UCD Group

Default Master Number

 

 

 

 

1

700

 

 

2

701

 

 

3

702

 

 

4

703

 

 

5

704

 

 

6

705

 

 

7

706

 

 

8

707

 

 

156 Features

DSX Software Manual

Page 186
Image 186
NEC N 1093100, P software manual UCD Hunting Notes, UCD Group Default Assignments Default Master Number

P, N 1093100 specifications

The NEC P,N 1093092,1093092 is a high-performance electronic component renowned for its versatility and advanced technology. As part of NEC's extensive portfolio, this component is designed to meet the demanding requirements of various industries, including telecommunications, automotive, and consumer electronics.

One of the main features of the NEC P,N 1093092,1093092 is its impressive operational efficiency. This component offers low power consumption without compromising performance, making it an ideal choice for battery-operated devices and energy-sensitive applications. Its ability to function effectively at low voltage levels further enhances its appeal, allowing manufacturers to design smaller, more efficient products.

Another key characteristic of the NEC P,N 1093092,1093092 is its robust reliability and durability. With a temperature range that can withstand extreme conditions, the component ensures consistent performance even in harsh environments. This reliability is critical for applications in sectors like automotive, where components are often subject to vibrations, temperature fluctuations, and other stress factors.

Moreover, the NEC P,N 1093092,1093092 integrates advanced semiconductor technology that enables high frequency and high-speed processing capabilities. This feature makes it suitable for applications requiring fast data transmission, such as in telecommunications infrastructure and data centre operations. As technology continues to evolve, the demand for components that can handle high data rates becomes increasingly important, and the NEC P,N 1093092,1093092 is well-equipped to meet these needs.

In terms of design, the component boasts a compact form factor, which facilitates integration into various hardware configurations. This flexibility allows engineers and designers to utilize the NEC P,N 1093092,1093092 in diverse applications while maintaining space efficiency in device design.

Finally, the NEC P,N 1093092,1093092 complies with international standards, ensuring that it meets the stringent quality requirements set forth for electronic components. This compliance not only enhances the component's reliability but also simplifies the certification process for manufacturers, making it a strategic choice for projects that require adherence to industry regulations.

In summary, the NEC P,N 1093092,1093092 stands out as a cutting-edge electronic component characterized by its operational efficiency, reliability, processing capabilities, compact design, and compliance with quality standards. Its advanced features make it an essential component for modern electronic applications across various industries.