NEC N 1093100 Programming Examples, Account Codes, Features, DSX Software Manual

Account Codes

Programming Examples

1.Forced Account Codes Require an Account Code only for 900 and 1 + 900 Long Distance Calls.

1.In 1412-04: Forced Account Codes (page 651), enter Yes.

2.In 1412-06: Account Codes for Toll Calls Only (page 651), enter Yes.

3.In 1551-04: Account Code Toll Restriction Level (page 668), enter 2 (for example).

Make the following entries for Toll Restriction Level 2.

4.In 3511-01: Active Key Pad (page 840), enter Yes.

In 3512-04: Allow N11 Dialing (page 842), enter Yes.

In 3512-01: Allow 0 + XXX Operator Assisted Dialing (page 841), enter Yes.

In 3512-03: Allow 101x Equal Access Dialing (page 841), enter Yes.

5.In 352x-1010-XXX / Local XXX (Equal Access Dialing) (page 844), make a deny table with no entries (i.e., deny nothing). This is the default setting.

6.In 353x-1+XXX /TBL-A XXX (NPA/NXX Dialing 3-Digit Table) (page 846), make a deny table and enter

900.

7.In 354x-1+XXX-XXX /TBL-A XXXXXXX (1 + NPA + NXX Dialing 6-Digit Table) (page 848), make a deny table with no entries (i.e., deny nothing). This is the default entry.

8.In 355x-XXX /TBL-B-XXX (NPA/NXX Dialing 3-Digit Table) (page 850), make a deny table and enter

900.

9.In 356x-XXX-XXX /TBL-B XXXXXX (NPA + NXX Dialing 6-Digit Table) (page 852), make a deny table with no entries (i.e., deny nothing). This is the default setting.

10.In 2102-01: Class of Service (page 724), assign the Class of Service with Forced Account Codes enabled to the extension.

11.In 2102-02: Station Toll Level (Day) (page 724) and 2102-03: Station Toll Level (Night) (page 724), be sure the extension does not use Toll Level 2. If it does, Toll Restriction will always deny 1 + 900 and 900 calls (regardless of whether the user enters an Account Code).

With this programming, an extension user can:

1.Press a line key or dial a code for an outside line.

2.Wait for a reminder tone (3 beeps).

•With Forced Account Codes enabled, the system automatically goes into the Account Code mode after you press a line key in step 1 above.

•If you have an Account Code Feature Key, it flashes green.

3.If dialing a 1 + 900 or 900 call, dial the Account Code. If dialing any other long distance call, skip this step.

4.Press # (if enabled), the Account Code soft key, or an Account Code Feature Key (if programmed).

5.Dial the outside number.

•If the user doesn’t enter an Account Code for 900 or 1 + 900 calls, the system will cut off the call.

•The system will also cut off any call not allowed by the extension’s Toll Restriction programming.

Features

DSX Software Manual Features ◆ 17