NEC Distinctive Ringing, Programming, Features, Conditions, Default Setting, Soft Keys

Distinctive Ringing

Conditions

• None

Default Setting

•Outside lines, Ring Groups, and UCD Groups use Type A ringing.

•The ASSIGN (ASGN) and KEY soft keys are disabled.

•The CONFIG (CNFG) soft keys is enabled.

Programming

1.Setting up Distinctive Ring Configuration.

1.Enable the CONFIG (CNFG) soft keys.

-In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.

-In 1405-01: Ring Type Configuration (page 641), enter Yes.

System Programming

2.To set up Distinctive Ring Configuration:

-To set the ring tone and cadence for Intercom ringing, use:

-2103-04: Station’s Intercom Ring Tone (page 727).

-To set the ring tone and cadence for Ring Group ringing, use:

-2103-05: Station’s Ring Group Ring Tone (page 727).

-To set the ring tone and cadence for recall ringing,

-2103-06: Station’s Recall Ring Tone (page 727).

-To set the ring tone and cadence for ring tone A, use:

-2103-07: Station’s Ring “A” Tone (page 728).

-To set the ring tone and cadence for ring tone B, use:

-2103-08: Station’s Ring “B” Tone (page 728)

-To set the ring tone and cadence for ring tone C, use:

-2103-09: Station’s Ring “C” Tone (page 728)

Soft Keys

3.To set up Distinctive Ring Configuration:

-Turn to Distinctive Ring Configuration (page 140) to set this up.

-This allows you to select new tones and/or cadences for the Ring Types you want to customize.

2.Setting up Line Override (Distinctive Ringing by Line and Ringing Mode).

System Programming

1.Set up Line Override using the following:

-In 3113-02: Day Ring Type (page 822), enter the day ring type (1=Type A, 2=Type B, 3=Type C).

-In 3113-03: Night Ring Type (page 823), enter the night ring type (1=Type A, 2=Type B, 3=Type C).

-In 3113-04: Delay Ring Type (page 824), enter the delay ring type (1=Type A, 2=Type B, 3=Type C).

Soft Keys

2.You cannot set up line override using an extension’s soft keys.

Features

DSX Software Manual Features ◆ 137