12xx-Slots

121x-Lines

1213-T1/E1 Card Setup

1213-03: Transmit Pulse Amplitude

(Tx Pulse Ampl.)

This option controls the amplitude (strength) of the T1 signals transmitted by the PCB to the telco smart jack or your CSU (if used).

Entries 0-4 correspond to the distance from the T1 PCB to either the telco’s smart jack or your CSU (depend- ing on your installation). The T1 PCB automatically adjusts the signal amplitude based on your entry.

You can alternately use entries 5-7 to make fixed attenuation entries. If connected to a CSU, set your attenu- ation to match the requirements of the CSU. If your T1 PCB is connected directly to the telco’s smart jack, the telco will tell you if any attenuation is required.

This option does not apply to E1 circuits.

Features

• T1 Lines (page 338)

IntraMail Features

• None

Options

•1 for 0-133 feet (0 dB)

•2 for 133-266 feet

•3 for 266-399 feet

•4 for 399-533 feet

•5 for 533-655 feet

•6 for -7.5 dB

•7 for -15 dB

•8 for -22.5 dB

Default

•1

1213-04: Framer Type

(ESF/CRC4)

Use this option to set the Framer Type used by the PCB.

If this option is enabled:

❥T1 circuits use ESF (Extended Super Frame) mode. This is a 24-Frame mode which provides ABCD sig- naling bits and additional diagnostics).

❥E1 circuits use CRC-4 16-Frame Multiframe mode.

If this option is disabled:

❥T1 circuits use D3/D4 (12-Frame Multiframe mode which supports AB signaling bits only).

❥E1 circuits do not use CRC4 mode.

Always set this option for compatibility with the connected telco. Normally, T1 circuits use ESF.

Features

• T1 Lines (page 338)

IntraMail Features

• None

Options

•No (0) - Disabled

•Yes (1) - Enabled

System 1001-1702

DSX Software Manual

System Options: 1001-1702 ◆ 617

Page 646 Page 648
Page 647
Image 647
NEC N 1093100 software manual Transmit Pulse Amplitude, Framer Type
Page 646 Page 648

P, N 1093100 specifications

The NEC P,N 1093092,1093092 is a high-performance electronic component renowned for its versatility and advanced technology. As part of NEC's extensive portfolio, this component is designed to meet the demanding requirements of various industries, including telecommunications, automotive, and consumer electronics.

One of the main features of the NEC P,N 1093092,1093092 is its impressive operational efficiency. This component offers low power consumption without compromising performance, making it an ideal choice for battery-operated devices and energy-sensitive applications. Its ability to function effectively at low voltage levels further enhances its appeal, allowing manufacturers to design smaller, more efficient products.

Another key characteristic of the NEC P,N 1093092,1093092 is its robust reliability and durability. With a temperature range that can withstand extreme conditions, the component ensures consistent performance even in harsh environments. This reliability is critical for applications in sectors like automotive, where components are often subject to vibrations, temperature fluctuations, and other stress factors.

Moreover, the NEC P,N 1093092,1093092 integrates advanced semiconductor technology that enables high frequency and high-speed processing capabilities. This feature makes it suitable for applications requiring fast data transmission, such as in telecommunications infrastructure and data centre operations. As technology continues to evolve, the demand for components that can handle high data rates becomes increasingly important, and the NEC P,N 1093092,1093092 is well-equipped to meet these needs.

In terms of design, the component boasts a compact form factor, which facilitates integration into various hardware configurations. This flexibility allows engineers and designers to utilize the NEC P,N 1093092,1093092 in diverse applications while maintaining space efficiency in device design.

Finally, the NEC P,N 1093092,1093092 complies with international standards, ensuring that it meets the stringent quality requirements set forth for electronic components. This compliance not only enhances the component's reliability but also simplifies the certification process for manufacturers, making it a strategic choice for projects that require adherence to industry regulations.

In summary, the NEC P,N 1093092,1093092 stands out as a cutting-edge electronic component characterized by its operational efficiency, reliability, processing capabilities, compact design, and compliance with quality standards. Its advanced features make it an essential component for modern electronic applications across various industries.
Top Page Image Contents