NEC P 21xx-Configuration, 211x-Options, Description, Huntingand Overflow Options, Station

21xx-Configuration

211x-Options

2115-Hunting and Overflow Options

2115-Hunting and Overflow Options

Description

Use this program to set the Extension Hunting and DID Intercept options for the extension (station).

If programming multiple extensions, you may find 9021-Station Copy (page 921) a handy time-saving tool.

Sample Hunt Group Programming

Circular HuntingCircular Hunting Programming (for 301, 303 and 304)

2115-01: Hunt Type	Enter the same Hunt Type for all three extensions:
	1	= Ring No Answer Line
	2	= Busy/Ring No Answer Line
	3	= Busy/Ring No Answer All Calls
	4	= Busy Line
2115-01: Hunt Destination
301	303
303	304
304	301 (This causes hunting to loop back to 301)
1603-01: Transfer Recall Timer	This timer sets how long an outside call waits at a busy member
	extension. It also sets how long a call rings each member extension
	as it cycles through the group.
1601-02: DIL No Answer Timer	This timer sets how long a DIL rings its destination member exten-
	sion before cycling through the group.

Terminal HuntingTerminal Hunting Programming (for 301 and 303)

2115-01: Hunt Type	Enter the same Hunt Type for all three extensions:
	1	= Ring No Answer Line
	2	= Busy/Ring No Answer Line
	3	= Busy/Ring No Answer All Calls
	4	= Busy Line
2115-01: Hunt Destination
301	303
303	304
304	Press CLEAR to undefine entry. (Hunting stops at 304.)
1603-01: Transfer Recall Timer	This timer sets how long an outside call waits at a busy member
	extension. It also sets how long a call rings each member extension
	as it cycles through the group.
1601-02: DIL No Answer Timer	This timer sets how long a DIL rings its destination member exten-
	sion before cycling through the group.

Station 2101-2501

DSX Software Manual Station Options: 2101-2501 ◆ 745