NEC N 1093100, P software manual #Rlp

User Programmable Features

User Programmable Features

To program a feature, press # and the feature’s code. For example, to enable incoming Paging, press # and dial V P Y, then SPEAKER to hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to the attendant.

Feature	Mnemonic		Numeric	Operation	Access Level
Ringing Line Preference	#RLP		#757	#RLP + Y to enable or N to disable +	2-5
				SPEAKER to exit.
Speed Dial, Personal	#SP		#77	#SP + Press bin key (for bins 701-710) or dial	1-5
				the bin key (701-720) + HOLD + Dial outside
				line (e.g., 1), Line group (e.g., 90-98), or ICM
				for Intercom feature + HOLD + Number to store
				+ HOLD twice + Name + HOLD + Press another
				bin key or SPEAKER to exit.
Speed Dial, System	#SP		#77	#SP + Dial System Speed Dial bin number	4 and 5
				(e.g., 201) + HOLD + Dial outside line (e.g., 1),
				Line group (e.g., 90-98), or INTERCOM for
				Intercom feature + HOLD + Number to store +
				HOLD twice + Name + HOLD + Dial another
				System Speed Dial bin or SPEAKER to exit.
System Program Access		#*#*		#*#* + Enter programming password	3-5
Time and Date	#TD		#83	#TD + Enter time in 24-hour clock using hours	4 and 5
				(2 digits), minutes (2 digits) and seconds (2 dig-
				its) + HOLD + Enter date using month (2 digits),
				day (2 digits) and year (4 digits) + HOLD +
				SPEAKER to exit.
Intercom Voice Announce	#VA		#82	#VA + V for voice announce or R for ring +	3-5
(for incoming Intercom				SPEAKER to exit.
calls)

Conditions

• None

Default Setting

•Extension 300 has its access level fixed at 5. (This means that by default only extension 300 can dial #TD to change the system time and date.)

•All other extensions have access level 3.

370 ◆ Features DSX Software Manual