NEC P, N 1093100 Group Ring, Setting Up Ring Group DILs, Features, DSX Software Manual

Group Ring

Setting Up Ring Group DILs

1.Should a DIL route to a Ring Group during the day?

1.If yes, in 3112-01: Direct Termination in the Day (page 819) enter the Ring Group master number.

-Use a System Night key to switch a DIL to a Ring Group from day to night mode.

2.If no, in 3112-01: Direct Termination in the Day (page 819) enter a day destination other than a Ring Group master number.

2.Should overflow occur for a DIL to a Ring Group that is unanswered during the day?

1.If yes:

-In 3112-02: Enable Day Overflow (page 819) enter Yes.

-In 3112-03: Day Overflow Destination (page 820) enter the day overflow destination. The destina- tion can be:

-An extension

-A UCD Group master number

-The voice mail master number

-A Ring Group master number

-Key Ring (by pressing CLEAR)

2.If no, in 3112-02: Enable Day Overflow (page 819) enter No.

3.Should a DIL route to a Ring Group at night?

1.If yes, in 3112-04: Direct Termination at Night (page 820) enter the Ring Group master number.

-Use a System Night key to switch a DIL to a Ring Group from day to night mode.

2.If no, in 3112-04: Direct Termination at Night (page 820) enter a day destination other than a Ring Group master number.

4.Should overflow occur for a DIL to a Ring Group that is unanswered at night?

1.If yes:

-In 3112-05: Enable Night Overflow (page 820) enter Yes.

-In 3112-06: Night Overflow Destination (page 821) enter the day overflow destination. The destina- tion can be:

-An extension

-A UCD Group master number

-The voice mail master number

-A Ring Group master number

-Key Ring (by pressing CLEAR)

2.If no, in 3112-05: Enable Night Overflow (page 820) enter No.

5.Be sure the DIL destination extension has a line key for the DIL.

1.In 2121-[01 to 24]: Feature Key Codes (page 758), to assign the key as a line key enter 03.

2.In 2121-[01 to 24]: Feature Key Data (page 758), enter the line circuit number (1-64).

6.Optionally set up a line key for the DIL on a DSS Console.

1.In 2402-[01-60]: DSS Console Key Codes (page 801), to assign the key as a line key enter 03.

2.In 2402-[01-60]: DSS Console Key Data (page 801), enter the line circuit number (1-64).

Features

DSX Software Manual Features ◆ 191