Nortel Networks 2300 manual Port Lists, 23x0# set port enable, 23x0# show port poe 1,2,4,13

Using the Command-Line Interface 41

Port Lists

The physical Ethernet ports on a WSS can be set for connection to AP access points, authenticated wired users, or the network backbone. You can include a single port or multiple ports in one WSS Software CLI command by using the appropriate list format.

The ports on a WSS are numbered 1 through 22. No port 0 exists on the switch. You can include a single port or multiple ports in a command that includes port port-list. Use one of the following formats for port-list:

•A single port number. For example:

23x0# set port enable 16

•A comma-separated list of port numbers, with no spaces. For example:

23x0# show port poe 1,2,4,13

•A hyphen-separated range of port numbers, with no spaces. For example:

23x0# reset port 12-16

•Any combination of single numbers, lists, and ranges. Hyphens take precedence over commas. For example:

23x0# show port status 1-3,14

Nortel WLAN Security Switch 2300 Series Configuration Guide