Nortel Networks 2300 manual Displaying Port Information, Displaying Port Configuration and Status

84Configuring and Managing Ports and VLANs

Displaying Port Information

You can use CLI commands to display the following port information:

•Port configuration and status

•PoE state

•Port statistics

You also can configure WSS Software to display and regularly update port statistics in a separate window.

Displaying Port Configuration and Status

To display port configuration and status information, use the following command:

show port status [port-list]

To display information for all ports, type the following command:
23x0#	show port status
Port	Name	Admin Oper Config	Actual	Type	Media

===============================================================================

1	1	up	up	auto	100/full	network	10/100BaseTx
2	2	up	down	auto		network	10/100BaseTx
3	3	up	down	auto		network	10/100BaseTx
4	4	up	down	auto		network	10/100BaseTx
5	5	up	down	auto		network	10/100BaseTx
6	6	up	down	auto		network	10/100BaseTx
7	7	up	down	auto		network	10/100BaseTx
8	8	up	down	auto		network	10/100BaseTx
9	9	up	up	auto	100/full	ap	10/100BaseTx
10	10	up	up	auto	100/full	network	10/100BaseTx
11	11	up	down	auto		network	10/100BaseTx
12	12	up	down	auto		network	10/100BaseTx
13	13	up	down	auto		network	10/100BaseTx
14	14	up	down	auto		network	10/100BaseTx
15	15	up	down	auto		network	10/100BaseTx
16	16	up	down	auto		network	10/100BaseTx
17	17	up	down	auto		network	10/100BaseTx
18	18	up	down	auto		network	10/100BaseTx
19	19	up	down	auto		network	10/100BaseTx
20	20	up	down	auto		network	10/100BaseTx
21	21	up	down	auto		network	no connector
22	22	up	down	auto		network	no connector

In this example, three of the switch’s ports, 1, 9, and 10, have an operational status of up, indicating the links on the ports are available. Ports 1 and 10 are network ports. Port 9 is an AP access port.

(For more information about the fields in the output, see the Nortel WLAN Security Switch 2300 Software Command Reference.)

Displaying PoE State

To display the PoE state of a port, use the following command:

show port poe [port-list]

To display PoE information for ports 7 and 9, type the following command:

320657-A