Nortel Networks 2300 Changing the Bridge Priority, Set spantree priority value all vlan vlan-id

Configuring and Managing Spanning Tree Protocol 315

Changing the Bridge Priority

To change the bridge priority, use the following command:

set spantree priority value {all vlan vlan-id}

Specify a bridge priority from 0 through 65,535. The default is 32,768. The all option applies the change globally to all VLANs. Alternatively, specify an individual VLAN.

To change the bridge priority of VLAN pink to 69, type the following command:

23x0# set spantree priority 69 vlan pink

success: change accepted.

Nortel WLAN Security Switch 2300 Series Configuration Guide