Nortel Networks 2300 manual Class a Statement RF Radiation Hazard Warning

10

FCC Statements for WLAN—Security Switches (23xx)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Statements for WLAN—Access Points (2330)

This section includes the following FCC statements for WLAN—Access Points (2330):

•“Class A Statement” on page 10

•“RF Radiation Hazard Warning” on page 10

•“Non-Modification Statement” on page 10

•“Deployment Statement” on page 11

Class A Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

RF Radiation Hazard Warning

To ensure compliance with FCC RF exposure requirements, this device must be installed in a location such that the antenna of the device will be greater than 20 cm (8 in.) from all persons. Using higher gain antennas and types of antennas not covered under the FCC certification of this product is not allowed.

Installers of the radio and end users of the Nortel 2300 Series must adhere to the installation instructions provided in this manual.

Non-Modification Statement

Use only the supplied internal antenna, or external antennas supplied by the manufacturer. Unauthorized antennas, modifications, or attachments could damage the badge and could violate FCC regulations and void the user’s authority to operate the equipment.

Note: Refer to the Nortel 2300 Series Release Notes for 802.11a external antenna information. Contact Nortel for a list of FCC-approved 802.11a and 802.11b/g external antennas.

320657-A