Nortel Networks 2300 manual Logging In to a Remote Device, 23x0# telnet

Configuring and Managing IP Interfaces and Services 151

Logging In to a Remote Device

From within an WSS Software console session or Telnet session, you can use the Telnet client to establish a Telnet client session from a WSS switch’s CLI to another device. To establish a Telnet client session with another device, use the following command:

telnet {ip-addr hostname} [port port-num]

To establish a Telnet session from WSS 2370 to 10.10.10.90, type the following command:

23x0# telnet 10.10.10.90

Session 0 pty tty2.d Trying 10.10.10.90...

Connected to 10.10.10.90

Disconnect character is '^t'

Copyright (c) 2002, 2003

Nortel , Inc.

Username:

When you press Ctrl+t or type exit to end the client session, the management session returns to the local WSS prompt:.

WSS-2370-remote> Session 0 pty tty2.d terminated tt name tty2.d WSS-2370#

Use the following commands to manage Telnet client sessions:

show sessions telnet client

clear sessions telnet client [session-id]

These commands display and clear Telnet sessions from a WSS’s Telnet client to another device.

To display the Telnet client sessions on a WSS, type the following command:

23x0# show sessions telnet client
Session	Server Address	Server Port	Client Port
-------	--------------	------------	-----------
0	192.168.1.81	23	48000
1	10.10.1.22	23	48001

To clear Telnet client session 0, type the following command:

23x0# clear sessions telnet client 0

You also can clear a Telnet client session by typing exit from within the client session.

Nortel WLAN Security Switch 2300 Series Configuration Guide