Nortel Networks 2300 manual Copying Trace Results to a Server, Clearing the Trace Log

Appendix A: Troubleshooting a WS Switch 585

Copying Trace Results to a Server

To copy the contents of the trace buffer to a file on a TFTP server, use the following command:

copy trace-buffer-name tftp://[destination-ip-addr destination-hostname]/destination-filename

To find the name of the trace buffer file, use the dir command.

For example, the following command copies the log messages in trace buffer 0000000001 to a TFTP server at IP address 192.168.253.11, in a file called log-file:

23x0# copy 0000000001 tftp://192.168.253.11/log-file

Clearing the Trace Log

To clear all messages from the trace log buffer, type the following command:

23x0# clear log trace

List of Trace Areas

To see all WSS Software areas you can trace, type the following command:

23x0# set trace ?

Nortel WLAN Security Switch 2300 Series Configuration Guide