524Managing System Files

Deleting a File

Warning! WSS Software does not prompt you to verify whether you want to delete a file. When you press Enter after typing a delete command, WSS Software immediately deletes the specified file. Nortel recommends that you copy a file to a TFTP server before deleting the file.

Note. WSS Software does not allow you to delete the currently running software image file or the running configuration.

To delete a file, use the following command:

delete url

The URL can be a filename of up to 128 alphanumeric characters.

To copy a file named testconfig to a TFTP server and delete the file from nonvolatile storage, type the following commands:

23x0# copy testconfig tftp://10.1.1.1/testconfig

success: sent 365 bytes in 0.401 seconds [ 910 bytes/sec]

23x0# delete testconfig

success: file deleted.

320657-A

Page 524
Image 524
Nortel Networks 2300 Deleting a File, Delete url, 23x0# copy testconfig tftp//10.1.1.1/testconfig, 23x0# delete testconfig