Nortel Networks 2300 manual Default Encryption

Configuring User Encryption 193

Figure 2 shows the client support when the default encryption settings are used. A radio using the default encryption settings encrypts traffic for non-WPA dynamic WEP clients but not for WPA clients or static WEP clients. The radio disassociates from these other clients.

Figure 2. Default Encryption

WLAN Security Switch

Encryption settings: -WPA disabled -Dynamic WEP enabled -Static WEP disabled

User A			User D
Dynamic WEP	User B	User C	TKIP
Non-WPA			WPA
	Dynamic 40-bit WEP	Static WEP
	WPA	Non-WPA

840-9502-0030

This rest of this chapter describes the encryption types and how to configure them, and provides configuration scenarios.

Nortel WLAN Security Switch 2300 Series Configuration Guide