Nortel Networks 2300 manual Fixing Common WSS Setup Problems, WSS Setup Problems and Remedies

572Appendix A: Troubleshooting a WS Switch

Fixing Common WSS Setup Problems

Table 36 contains remedies for some common problems that can occur during basic installation and setup of an WSS switch.

Table 36: WSS Setup Problems and Remedies

Symptom	Diagnosis	Remedy
WLAN Management	The switch’s time and date are	1.	Use set timezone to set the time zone in
Software or a web	currently incorrect, or were		which you are operating the switch. (See
browser (if you are using	incorrect when you generated		“Setting the Time Zone” on page 137.)
Web View) warns that the	the self-signed certificate or	2.	Use set timedate to configure the current
WSS switch’s certificate	certificate request.		time and date in that time zone. (See
date is invalid.			“Statically Configuring the System Time
			and Date” on page 139.)
		3.	Reconfigure the administrative
			certificate(s). (See Chapter , “Managing
			Keys and Certificates,” on page 379.)
		4.	If you have already configured a certificate
			on the switch for authentication by network
			users, you must recreate this certificate, too.
WSS switch does not	The country code might not be	1.	Type the show system command to display
accept configuration	set or might be set for another		the country code configured on the switch.
information for an AP	country.	2.	If the value in the System Countrycode field
access point or a radio.			is NONE or is for a country other than the

one in which you are operating the switch, use the set system countrycode command to configure the correct country code. (See “Specifying the Country of Operation” on page 248.)

320657-A