Nortel Networks 2300 manual Saving Configuration Changes, Save config filename

Managing System Files 529

Saving Configuration Changes

To save the running configuration to a configuration file, use the following command:

save config [filename]

If you do not specify a filename of up to 128 alphanumeric characters, the command replaces the startup configuration file that was loaded the last time the software was rebooted. (To display the filename of that configuration file, see “Displaying Boot Information” on page 520.)

To save the running configuration to the file loaded the last time the software was rebooted, type the following command:

23x0# save config

success: configuration saved.

To save the running configuration to a file named newconfig, type the following command:

23x0# save config newconfig

success: configuration saved to newconfig.

Nortel WLAN Security Switch 2300 Series Configuration Guide