Nortel Networks 2300 manual Changing the Client Retransmission Threshold

Configuring RF Auto-Tuning 299

To set the maximum power that RF Auto-Tuning can set on radio 1 on the AP access point on port 7 to 12 dBm, type the following command.

23x0# set ap 7 radio 1 auto-tune max-power 12

success: change accepted.

Changing the Client Retransmission Threshold

By default, the maximum percentage of client retransmissions a radio can experience before RF Auto-Tuning considers changing the channel on the radio is 10 percent. You can change the threshold to value from 1 to 100 percent. To change the max-retransmissions threshold, use the following command:

set {ap port-listdap dap-num}radio {1 2} auto-tune max-retransmissions

retransmissions

Examples To change the max-retransmissions threshold to 20 percent for radio 1 on the directly connected AP access point on port 7, type the following command:

23x0# set ap 7 radio 1 auto-tune max-retransmissions 20

success: change accepted.

Nortel WLAN Security Switch 2300 Series Configuration Guide