Fujitsu MAP3147NC/NP manual Environmental specifications, Environmental/power requirements, Iops

2.1.3Environmental specifications

Table 2.3 lists environmental and power requirements.

		Table 2.3	Environmental/power requirements
	Item				Specification
			MAP3147NC/NP		MAP3735NC/NP	MAP3367NC/NP
	Operating				5 to 55°C
	Non-operating				–40 to 70°C
Temperature	Transport				–40 to 70°C
	(within a week)
(*1)
	DE surface temperature				5 to 60°C
	at operating
	Gradient				15°C/h or less
	Operating				5 to 95%RH
	Non operating				5 to 95%RH
Relative	Transport				5 to 95%RH
humidity	(within a week)
	Maximum wet bulb			29°C (no condensation)
	temperature
Vibration	Operating (*3)		0.3 mm (5 to 20Hz)/9.8 m/s2 (1G) (20 to 300 Hz) or less
	Non-operating (*4)		3.1 mm (5 to 20Hz)/49m/s2 (5G) (20 to 300Hz) or less
(*2)
	Transport (packaged)		3.1 mm (5 to 20Hz)/49m/s2 (5G) (20 to 300Hz) or less
	Operating			637.4m/s2 (65G) (2 ms)
Shock (*2)	Non-operating			1961.3m/s2 (200G) (2 ms)
	Transport (packaged)			1961.3m/s2 (200G) (2 ms)
Altitute	Operating				–300 m to 3,000 m
(above sea	Non-operating				–300 m to 12,000 m
level)
		Ready	0.65 A		0.42 A	0.33 A
		(Average)
		Peak within
	+12 VDC	100 ∝ s at			3.0 A
	±5%	spin-up
Power		Random
		W/R
requirements			0.90 A		0.65 A	0.55 A
		(about 80
Input power
		IOPS)
(*5)
		Ready			0.38 A
	+5 VDC	Random
		W/R
	±5% (*6)				0.70 A
		(about 80
		IOPS)
	Ripple (*7)			+5 V/+12 V 250 mVp-p

(*1) For detail condition, see Section 4.1.

(*2) Vibration applied to the drive is measured at near the mounting screw hole on the frame as much as possible.

(*3) At random seek write/read and default on retry setting with log sweep vibration.

2-4 C141-E166