a. Control mode parameters

 

 

 

 

Parameter

 

Default value

 

 

 

 

 

• Queue algorithm modifier

 

0 (Execution

 

 

 

 

sequence of

 

 

 

 

read/write

 

 

 

 

commands is

 

 

 

 

optimized.)

 

• QErr:

Resume or abort remaining suspended

 

0 (command is

 

 

commands after sense pending state

 

resumed)

 

• DQue:

Disabling tagged command queuing

 

0 (enabled)

5.7Dismounting Drives

Since dismounting the drive to check the setting terminals, change the setting, or change the drive depends on the structure of the system cabinet, the work procedures must be determined in consideration of the requirements specific to the system. This section describes the general procedures and notes on dismounting the drive.

It is recommended before dismounting the drive to make sure the spindle motor completely stops after power was turned off.

a)Remove the power cable.

b)Remove the SCSI cable.

NC Model uses a single cable for power supply and the SCSI interface.

c)When the external operator panel is mounted, remove the cable. If it is difficult to access the connector position, the cable may be removed after step e).

d)Remove the DC ground cable.

e)Remove the four mounting screws securing the drive, then remove the drive from the system cabinet.

f)To store or transport the drive, keep it in an antistatic bag and provide packing (see Section 5.1).

5.8Spare Disk Drive

See 2.1.1, “Model name and order number,” to order a disk drive for replacement or as a spare.

C141-E166

5-23

Page 94 Page 96
Page 95
Image 95
Fujitsu MAP3147NC/NP, MAP3735NP, MAP3735NC/NP, MAP3367NC/NP, MAP3367NP manual Read/write
Page 94 Page 96

MAP3735NP, MAP3367NC, MAP3735NC/NP, MAP3367NC/NP, MAP3147NC/NP specifications

Fujitsu's MAP3147NC/NP, MAP3367NC/NP, and MAP3735NC/NP hard disk drives represent a robust solution for businesses seeking reliable data storage options. These models are part of Fujitsu’s extensive line of high-performance hard drives that cater to various organizational needs, from servers to high-capacity data storage systems.

One of the standout features of these hard drives is their speed. The MAP3147NC/NP operates at a spindle speed of 10,000 RPM, ensuring rapid data access and retrieval. This speed is essential for environments requiring quick data transactions, making it suitable for enterprise-level databases and high-performance computing applications.

The capacity range across these models is designed to meet varying storage requirements. The MAP3147NC offers 147 GB, while the MAP3367NC provides 67 GB, and the MAP3735NC boasts a generous capacity of 35 GB. This diversity allows organizations to select the drive that best fits their data storage and performance needs while maintaining a scalable storage solution.

In terms of technology, the drives incorporate advanced features such as Serial Attached SCSI (SAS) interface, which enhances data throughput and reliability compared to traditional Parallel SCSI interfaces. SAS technology enables these drives to support multiple device connections while ensuring high-performance throughput, essential for modern enterprise environments.

The drives employ a 64 MB cache, providing a significant performance boost by allowing for quicker access to frequently used data. This capability improves overall system responsiveness, especially in applications requiring high input/output operations per second (IOPS).

Moreover, the MAP3147NC/NP, MAP3367NC/NP, and MAP3735NC/NP series are designed with data integrity in mind. They include features such as Error Correction Code (ECC) and background error scanning, which work together to maintain the integrity of stored data and minimize the risk of data loss.

In conclusion, Fujitsu’s MAP3147NC/NP, MAP3367NC/NP, and MAP3735NC/NP hard disk drives provide a blend of performance, capacity, and reliability. With their fast spindle speeds, robust data throughput via SAS technology, and enhanced cache memory, these drives are ideal for enterprises requiring durable and efficient data storage solutions in high-demand environments. As organization needs evolve, these drives offer scalability and reliability to support diverse applications and workloads.
Top Page Image Contents