280Configuring AP access points

Resetting a Radio to its Factory Default Settings

To disable an AP radio and reset it to its factory default settings, use the following command:

clear {ap port-listdap dap-num}radio {1 2 all}

This command performs the following actions:

Sets the transmit power, channel, and external antenna type to their default values.

Removes the radio from its radio profile and places the radio in the default radio profile. This command does not affect the PoE setting.

To disable and reset radio 2 on the AP access point connected to port 3, type the following command:

23x0# clear ap 3 radio 2

320657-A

Page 280
Image 280
Nortel Networks 2300 manual Resetting a Radio to its Factory Default Settings, Clear ap port-listdap dap-numradio 1 2 all