Nortel Networks 2300 manual Port Priority

314Configuring and Managing Spanning Tree Protocol

Table 21: SNMP Port Path Cost Defaults (continued)

Port Speed	Link Type	Default Port Path
		Cost
10 Mbps	Full Duplex	95
10 Mbps	Half Duplex	100

Port Priority

Port priority is the eligibility of the port to be the designated port to the root bridge, and thus part of the path to the root bridge. When the WSS switch has more than one link to the root bridge, STP uses the link with the lowest priority value. You can set this parameter on an individual port basis, for all VLANs the port is in, or for specific VLANs.

Specify a priority from 0 (highest priority) through 255 (lowest priority). The default is 128.

320657-A