Nortel Networks 2300 Using Show Commands, Viewing Vlan Interfaces, Viewing AAA Session Statistics

586Appendix A: Troubleshooting a WS Switch

Using Show Commands

To troubleshoot the WSS switch, you can use show commands to display information about different areas of the WSS Software. The following commands can provide helpful information if you are experiencing WSS Software performance issues.

Viewing VLAN Interfaces

To view interface information for VLANs, type the following command:

WSS-2370# show interface

* = From DHCP
VLAN	Name	Address	Mask	Enabled State		RIB
----	---------------	---------------	---------------	------- -----		--------
1	default	0.0.0.0	0.0.0.0	NO	Down	ipv4
130	vlan-eng	192.168.12.7	255.255.255.0	YES	Up	ipv4
190	vlan-wep	192.168.19.7	255.255.255.0	YES	Up	ipv4

(For more information about VLAN interfaces, see “Configuring and Managing VLANs” on page 88.)

Viewing AAA Session Statistics

To view AAA session statistics, type the following command:

23x0# show aaa

Default Values

authport=1812 acctport=1813 timeout=5 acct-timeout=5 retrans=3 deadtime=5 key=(null) author-pass=(null)

Radius Servers
Server	Addr	Ports T/o Tries Dead State

-------------------------------------------------------------------

SQA2BServer	11.1.1.11	1812	1813	5	3	5	UP
SideShow	192.168.0.21	1812	1813	5	3	0	UP

Server groups sg1: SideShow SQA: SQA2BServer

set authentication dot1x *@xAPl.com pass-through sg1 set authentication dot1x *@xAPl.com pass-through SQA set authentication dot1x EXAMPLE\* peap-mschapv2 sg1

user sqa

password = 08325d4f (encrypted) session-timeout = 3600

mac-user 00:00:a6:47:ad:03

session-timeout = 3600

320657-A