Nortel Networks 2300 manual Displaying RF Auto-Tuning Information

300Configuring RF Auto-Tuning

Changing the Minimum Transmit Data Rate

By default, a radio does not lower the transmit data rate for any client below the following values:

•5.5 Mbps for 802.11b/g clients

•24 Mbps for 802.11a clients

To change the minimum transmit data rate for 802.11b/g clients or 802.11a clients, use the following command:

set {ap port-listdap dap-num}radio {1 2} auto-tune min-client-rate rate

The rate can be one of the following:

•For 802.11g radios—54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, or 1

•For 802.11b radios—11, 5.5, 2, or 1

•For 802.11a radios—54, 48, 36, 24, 18, 12, 9, or 6

Displaying RF Auto-Tuning Information

You can display the RF Auto-Tuning configuration, a list of RF neighbors, and the values of RF attributes. (For information about the fields in the output, see the Nortel Mobility System Software Command Reference.)

320657-A