Nortel Networks 2300 manual Mapping Security ACLs, Clearing Security ACLs

Configuring and Managing Security ACLs 365

Clearing Security ACLs

The clear security acl command removes the ACL from the edit buffer only. To clear a security ACL, enter a specific ACL name, or enter all to delete all security ACLs. To remove the security ACL from the running configuration and nonvolatile storage, you must also use the commit security acl command.

For example, the following command deletes acl-99from the edit buffer:

23x0# clear security acl acl-99

To clear acl-99from the configuration, type the following command:

23x0# commit security acl acl-99

success: change accepted

Mapping Security ACLs

User-based security ACLs are mapped to an IEEE 802.1X authenticated session during the AAA process. You can specify that one of the authorization attributes returned during authentication is a named security ACL. The WSS switch maps the named ACL automatically to the user’s authenticated session.

Security ACLs can also be mapped statically to ports, VLANs, virtual ports, or Distributed APs. User-based ACLs are processed before these ACLs, because they are more specific and closer to the network edge.

Nortel WLAN Security Switch 2300 Series Configuration Guide