Nortel Networks 2300 manual Statically Configuring the System Time and Date

Configuring and Managing IP Interfaces and Services 139

Statically Configuring the System Time and Date

To statically configure the system time and date, use the following command:

set timedate {date mmm dd yyyy [time hh:mm:ss]}

The day of week is automatically calculated from the day you set.

To set the date to February 29, 2004 and time to 23:58:

23x0# set timedate date feb 29 2004 time 23:58:00

Time now is: Sun Feb 29 2004, 23:58:02 PST

The CLI makes the time change, then displays the current system time based on the change. (The time displayed might be slightly later than the time you enter due to the interval between when you press Enter and when the CLI reads and displays the new time and date.)

Nortel WLAN Security Switch 2300 Series Configuration Guide