Nortel Networks 2300 manual Displaying RF Attributes, 23x0# show auto-tune attributes ap 2 radio

Configuring RF Auto-Tuning 303

Displaying RF Attributes

To display the current values of the RF attributes RF Auto-Tuning uses to decide whether to change channel or power settings, use the following commands:

show auto-tune attributes [ap AP-num[radio {1 2all}]] show auto-tune attributes [dap dap-num[radio {1 2all}]]

To display RF attribute information for radio 1 on the directly connected AP access point on port 2, type the following command:

23x0# show auto-tune attributes ap 2 radio 1
Auto-tune attributes for port 2 radio 1:
Noise:	-92 Packet Retransmission Count:	0
Utilization:	0 Phy Errors Count:	0
CRC Errors count:	122

Nortel WLAN Security Switch 2300 Series Configuration Guide