Nortel Networks 2300 manual Displaying the Running Configuration, Show config area area all

Managing System Files 527

Displaying the Running Configuration

To display the configuration running on the WSS switch, use the following command:

show config [area area] [all]

The area area parameter limits the display to a specific configuration area. (For more information, see the Nortel Mobility System Software Command Reference.)

The all parameter includes all commands that are set at their default values. Without the all parameter, the show config command lists only those configuration commands that set a parameter to a value other than the default.

To display the running configuration, type the following command:

23x0# show config

#Configuration nvgen'd at 2004-5-10 19:08:38

#Image 2.1.0

#Model WSS-20

#Last change occurred at 2004-5-10 16:31:14 set trace authentication level 10

set ip dns server 10.10.10.69 PRIMARY set ip dns server 10.20.10.69 SECONDARY set ip route default 10.8.1.1 1

set log console disable severity debug set log session disable severity alert

set log buffer enable severity error messages 200 set log trace disable severity error mbytes 10 set log server 192.168.253.11 severity critical set timezone PST -8 0

set summertime PDT start first sun apr 2 0 end last sun oct 2 0 set system name WSS-20

set system countrycode US

set system contact nortel-pubs

set radius server r1 address 192.168.253.1 key sunflower set server group sg1 members r1

set enablepass password b6b706525e1814394621eeb2a1c4d5803fcf set authentication console * none

set authentication admin * none

set user tech password encrypted 1315021018 press any key to continue, q to quit.

To display only the VLAN configuration commands, type the following command:

23x0# show config area vlan

#Configuration nvgen'd at 2004-5-10 19:08:38

#Image 2.1.0

#Model WSS-20

#Last change occurred at 2004-5-10 16:31:14 set vlan 1 port 1

set vlan 10 name backbone tunnel-affinity 5 set vlan 10 port 21

Nortel WLAN Security Switch 2300 Series Configuration Guide