JVC RX-5020VBK, RX-5022VSL manual Other Manufacturers Video Equipment

To change the transmittable signals for	To change the transmittable signals for
operating a VCR	operating a DVD player

Operating

1Press and hold STANDBY/ON VCR.

2Press VCR.

3Enter manufacturer’s code using buttons 1–9, and 0.

4Release STANDBY/ON VCR.

Now, you can perform the following operations on the VCR.

STANDBY/ON	VCR : Turn on or off the VCR.
VCR CH +/–	: Change the channels.

After pressing VCR (source selecting button), you can use the following buttons on the VCR:

3	: Start playback.
FF	: Fast-wind a tape.
REW	: Rewind a tape.
7	: Stop playback or recording.
8	: Pause playback. To release it, press 3.
REC PAUSE	: Press this button to enter recording
	pause.
	Press this button then 3 to start
	recording.

Note:

Refer also to the manual supplied with your VCR.

5Try to operate your VCR by pressing

STANDBY/ON VCR.

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

VCR, try each one until the correct one is entered.

Manufacturers’ codes for VCR

Manufacturer	Codes
JVC	01*, 02, 03
Emerson	10, 22
Gold Star	11
Hitachi	04
Mitsubishi	12
NEC	21
Panasonic	07, 13
Philips	09
RCA	05, 06
Samsung	20
Sanyo	17, 18, 19
Sony	14, 15, 16
Zenith	08

*Initial setting

1Press and hold STANDBY/ON DVD.

2Press DVD.

3Enter manufacturer’s code using buttons 1–9, and 0.

4Release STANDBY/ON DVD.

Now, you can use the following buttons on the DVD player.

STANDBY/ON DVD : Turn on or off the DVD player.

After pressing DVD (source selecting button), you can use the following buttons on the DVD player:

3	: Start playback.
7	: Stop playback.
¢	: Skip to the beginning of the next track.
4	: Return to the beginning of the current
	(or previous) track.
8	: Pause playback. To release it, press 3.

DVD menu operations		TEST	CENTER
After pressing DVD (source		1	2	3
		EFFECT	REAR L
selecting button), you can use the
		4	5	6
following buttons for DVD menu		MENU	REAR R
operations:		7/P	8	9
		ENTER	SUBWOOFER
		10	0	10
		RETURN	100
MENU	: Display or erase the menu screen.
5/∞/3/2	: Select an item on the menu screen.
ENTER	: Enter a selected item.

5Try to operate your DVD player by pressing

STANDBY/ON DVD.

When your DVD player turns on or off, you have entered the correct code.

Manufacturers’ codes for DVD player

Manufacturer	Codes
JVC	01*
Panasonic	02
Philips	04
Pioneer	03
Sony	05
Toshiba	06
Yamaha	07

*Initial setting

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

Other Manufacturers' Video Equipment

29