JVC RX-5022VSL, RX-5020VBK manual Dolby DTS Plii Live Dance Hall Pavilion ALL CH

■DAP (Digital Acoustic Processor) modes

DAP modes have been designed to create important acoustic surround elements.

The sound heard in a live club, dance club, hall or pavilion consists of direct sound and indirect sound—early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are delayed by the distances of the ceiling and walls (see the diagram below).

These indirect sounds are important elements of the acoustic surround effects. The DAP mode can reproduce a realistic sound field by adding these indirect sounds.

DAP modes can be used when the front and rear speakers are connected to this receiver (without respect to the center speaker connection: no sound comes out of the center speaker even if it is connected).

The following DAP modes are provided with this receiver:

LIVE CLUB : Gives the feeling of a live music club with a low ceiling.

DANCE CLUB : Gives a throbbing bass beat.

HALL	: Gives clear vocal and the feeling of a concert
	hall.
PAVILION	: Gives the spacious feeling of a pavilion with a
	high ceiling.

These DAP modes can be used to add the acoustic surround effects while reproducing 2 channel stereo software—either analog or digital except Dolby Digital and DTS Digital Surround—and can give you a real “being there” feeling.

•When one of the DAP modes is selected, the DSP indicator lights up on the display.

■All Channel Stereo

This mode can reproduce a larger stereo sound field using all the connected (and activated) speakers.

All Channel Stereo can be used when the front and rear speakers are connected to this receiver without respect to the center speaker connection.

If the center speaker is connected and activated, the same phase of the front left and right signals are output through the center speaker.

All Channel Stereo can be used while reproducing 2 channel stereo software, either analog or digital except Dolby Digital and DTS Digital Surround.

•When All Channel Stereo is selected, the DSP indicator lights up on the display.

All Channel Stereo reproduction

Sound reproduced from normal stereo

English

Creating sound field

Reflections from behind

Early reflections

Direct sounds Sound reproduced from All Channel Stereo

Available Surround modes for each input signal								◯: Possible / ×: Impossible
Mode	SURROUND	DOLBY	DTS	PLII	PLII	LIVE	DANCE	HALL	PAVILION	ALL CH
Signals	OFF (stereo)	DIGITAL	SURROUND	MOVIE	MUSIC	CLUB	CLUB			STEREO
Dolby Digital	◯	◯	×	×	×	×	×	×	×	×
(Multichannel)
Dolby Digital	◯	×	×	◯	◯	×	×	×	×	×
(2 channel)
DTS Digital
Surround	◯	×	◯	×	×	×	×	×	×	×
(Multichannel)
DTS Digital
Surround	◯	×	×	◯	◯	×	×	×	×	×
(2 channel)
Linear PCM	◯	×	×	◯	◯	◯	◯	◯	◯	◯
Analog	◯	×	×	◯	◯	◯	◯	◯	◯	◯

19